The feed tanker of the layer battery cage equipment delivers the feed to the feed storage tower outside the chicken house on time, and then the horizontal feeding device sends the feed in the feed tower to the feeding hopper of each cage rack according to the set time. This is the operation of the automated feeding equipment.

After the last crane hopper is filled with feed, the horizontal feeding device automatically stops feeding. The feeding crane runs backward according to the set time, and when it runs to the end of each row of cages, the crane stops automatically. During operation, the hopper of each layer of the crane corresponds to a trough, which can evenly drop the feed in the trough, and each chicken can freely eat fresh feed.

After the chickens have eaten the feed in the trough, the feeding carriage automatically runs to the front of the cage, and then automatically stops at the head rack position. In the process of operation, the driving truck drops the feed evenly in the trough again, and this process completes a feeding procedure. The number of feedings in a day depends on the craft of each farm. The water supply line of the stacked layer cage equipment is set in the middle of the top of each layer of chicken cages, and each cage is equipped with two nipples for the chickens on the left and right sides to drink. A V-shaped sink is set below to remove the chickens. The water splashed when drinking water catches it and evaporates naturally. In this way, the splashed water will not fall into the chicken manure, making the chicken manure more dry.

At the front end of each water line, a filter, a smart water meter, a medicine dosing device and a pressure reducing regulator are installed. Through the digital information of the smart water meter, it is possible to understand the daily drinking situation of the chickens and the laying hens, and the operation process of the laying hen breeding equipment can also judge the health of the chickens.

Layer cage system equipment can provide a good operating atmosphere for breeding. In the installation process of layer breeding equipment, you need to pay attention to the details. During the operation, especially during installation and wiring, it is forbidden to operate with electricity, keep the operating environment dry, avoid the influence of moisture on the equipment, and keep the space and the drive of the equipment can be ventilated at any time.